Specifications, Requirements, and Setup

Package Contents

The Tenstorrent TT-LoudBox (T3000) 4U/Desktop Workstation system package includes:

  • Tenstorrent TT-LoudBox (T3000) 4U/Desktop Workstation system

  • C13 Power Cable, 1.8m/6ft.

  • 4U Rack-Mounting Kit

  • 2x QSFP-DD 400GbE Cable, 0.6m/2ft. (TW-02002 only)

System Specifications

Specification

TT-LoudBox (TW-02001)

TT-LoudBox (TW-02002)

CPU

2x Intel® Xeon® Silver 4309Y
(8C/16T ea., up to 2.8GHz, 105W, Ark)

2x Intel® Xeon® Silver 4309Y
(8C/16T ea., up to 2.8GHz, 105W, Ark)

Memory

256GB (8x32GB)
DDR4-3200 ECC RDIMM
(12 Slots Free)

512GB (16x32GB)
DDR4-3200 ECC RDIMM
(12 Slots Free)

Storage

3.8TB U.2 NVMe PCIe 4.0 x4

3.8TB U.2 NVMe PCIe 4.0 x4

Tensix Processors

4x Tenstorrent Wormhole™ n150s Tensix Processor

4x Tenstorrent Wormhole™ n300s Tensix Processor*
4x Warp 100 Interconnects

Cables

-

2x QSFP-DD 400GbE Cable, 0.6m/2ft.

Connectivity

2x RJ45 10GBase-T via Intel® X550-AT
5x USB 3.1 Gen 1 (5GBps) Type-A (2x Front, 3x Rear)
1x USB 3.1 Gen 1 (5GBps) Type-C
1x COM
1x VGA
1x IPMI

2x RJ45 10GBase-T via Intel® X550-AT
5x USB 3.1 Gen 1 (5GBps) Type-A (2x Front, 3x Rear)
1x USB 3.1 Gen 1 (5GBps) Type-C
1x COM
1x VGA
1x IPMI

Power Supply

1+1 Titanium Level PSUs
1200W: 100-127Vac
1800W-2090W: 200-240Vac
2200W: 220-240Vac

1+1 Titanium Level PSUs
1200W: 100-127Vac
1800W-2090W: 200-240Vac
2200W: 220-240Vac*

Base System

SuperMicro SuperServer SYS-740GP-TNRT

SuperMicro SuperServer SYS-740GP-TNRT

Operating System

None

None

*200V input or higher input voltage required for TW-02002.

NOTE: The MAC address and password for the BMC (baseboard management controller) can be found on labels on both the system chassis and the motherboard. A small slide-out tray with the label is hidden behind the front cover, at the bottom of the system. The label will look like this:

Operating System Requirements

The Tenstorrent TT-LoudBox system ships without an operating system installed. We recommend installing Ubuntu 20.04 (Focal Fossa) to properly use the Tenstorrent Tensix Processors.

4U Rack-Mounting Instructions

The Tenstorrent TT-LoudBox ships assembled for desktop use. Instructions to rack-mount the system using the included 4U rack-mounting kit are available in Chapter 2 of the Manual for the SuperMicro SuperServer SYS-740GP-TNRT.

QSFP-DD Connections and System Topology (TW-02002)

The Tenstorrent TT-LoudBox configuration in TW-02002 includes four Wormhole™ n300s Tensix Processors and internal Warp 100 bridges and external QSFP-DD cables that enable the Tensix Processor mesh.

The TT-LoudBox ships with the Warp 100 bridges connected, but the two QSFP-DD cables will need to be connected. This diagram displays the system topology and how the cards are enumerated, along with where the Warp 100 bridges are connected and where the included QSFP-DD cables need to be connected.

One QSFP-DD cable will need to be connected to Port 1 on the cards in Slots 1 and 4.

One QSFP-DD cable will need to be connected to Port 2 on the cards in Slots 3 and 2.

Environment Specifications

Please visit the Tenstorrent Wormhole n150s and n300s specification page for environment specifications for those cards.

Please visit the SuperMicro SuperServer SYS-740GP-TNRT page for environment specifications for this system.

Software Setup

Instructions on how to set up software on TT-LoudBox are available here.