Blackhole FAQ and Troubleshooting

Which card should I choose?

See Choosing a Card.

How can I check if my system is compatible with a Blackhole card?

See Choosing Host Hardware for Blackhole p150a and p150b Cards.

What Power Supply Unit (PSU) and connector should I use?

Blackhole cards use a 12V-2x6 (12+4-pin) connector and are designed for ATX 3.1 certified or newer power supplies. A native 12V-2x6 connector is recommended. Never use an ATX 3.0 or older power supply.

My PSU has no 12V-2x6 connector. What adapter should I use?

Use only a cable or adapter supplied or explicitly approved by the PSU manufacturer. It may combine standard 8-pin PCIe and/or EPS 4+4-pin connectors, provided the combined delivery meets the card’s 300W requirement and the PSU is ATX 3.1 certified or better. Connect each input cable to a separate PSU output, and make sure the total load stays within the PSU’s rated output.

Many manufacturers key their connectors so that only their own cables work. Fully seat the connector and avoid tight bends near it. Older 12VHPWR cables are physically compatible but not recommended, as they have an increased risk of overheating from poor seating. The 12V-2x6 standard replaced them for this reason.

Which QSFP-DD cables should I buy?

See Multi-Card Topologies.

My card is not enumerating

Blackhole cards are designed for PCIe Gen 5.0, but some motherboards default PCIe operation to Auto, which can prevent enumeration. In the BIOS, force the slot to Gen 4.0 or Gen 5.0. Also check that the card is fully seated and that the power cable is connected. See Installing a Blackhole Card and Choosing Host Hardware.

Once the card enumerates, update to the latest firmware. See Installing Tenstorrent Software.

TT-SMI does not work correctly

Check that PCIe AER Reporting Mechanism is set to OS First in the BIOS. See Choosing Host Hardware.

The idle power consumption seems high

Blackhole cards typically draw about 75W at idle. Wall measurements read higher because of AC-to-DC conversion loss in the power supply. Tenstorrent is exploring further idle power reductions through firmware updates.

The reported temperatures seem high

Blackhole processors are designed to run continuously at up to 90C, and the card automatically reduces clock speeds to prevent overheating. The card will automatically shutdown if it reaches 110C.

The fan noise is too quiet or too loud

Feedback on p100a and p150a fan noise varies. Tenstorrent is evaluating end-user fan controls for a future update.

How can I test multiple cards together?

Set up the Llama 3.1 8B demo from TT-Transformers. See also Multi-Card Topologies.

My new host has no network after installing Ubuntu

Some motherboards need a network driver that stock Ubuntu lacks. See Choosing Host Hardware.

Need additional support?

Please raise a support request. We are happy to help.